![]() Proposition 65 Warning for California Residents: This product can expose you to chemicals including Benzene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. The CO2 and CH4 cells will last the lifetime of the analyzer. For the GEM 5000 the lifespans are 3 years for the O2 cell and 2 years for the H2S and CO cells. USB type B mini-connect or, HID device class In our Optimax and SWG 100 units the O2 cell will last between 4-6 years while the H2S and CO cells will last 4-5 years. X 2 using optional probes, range 32 ☏ to 122 ☏ (0☌ to +50.0 ☌) ![]() ± 201 "H20 from calibration pressure, (± 500mbar)ĥV DC external power supply and internal charging circuitĪBS / Polypropylene with Silicon Rubber Insertsīuilt-in gas dryer tube to remove moisture Pressure dependence: ± 0.02% of reading / hPa (typical at 5% CO2) Temperature dependence: ± 0.2% reading (typical at 5% CO2) Viasensor G100-00N CO2 0-20% Incubator AnalyzerĬO2 By custom dual wavelength infra-red with reference channelĬO2: Accuracy: ± (1% of range + 2% of reading) at reference conditions Viasensor G150-00N - changes the CO2 sensor to measure 0-10,000ppm Viasensor G110-00N - changes the CO2 sensor to measure 0-100% Viasensor G100-11N - adds both the RH Probe and the O2 Sensor Viasensor G100-10N - adds an O2 sensor measurement from 0-100% Viasensor G100-01N - adds a 15mm RH Probe Looking for other measurements or CO2 ranges? Check out these configurations below. The Viasensor G100-00N CO2 incubator tester includes the following: Please Note: Viasensor also recommends users to self calibrate the unit roughly once a month using the optional G-CALKIT Calibration Kit (Calibration gas sold separately). From Diamond Scientific: Video features a quick run-though on taking a gas sample reading, using the Viasensor G100-10N gas analyzer series. Viasensor backs this incubator analyzer with a 1 year warranty. Viasensor offers a relative humidity probe port option available as the G100-01N. ![]() The internal pump has a flowrate of roughly 100 cc/min and. The G100-00N incubator tester has ports for two temperature probes that can be purchased separately. The Viasensor G100 is lightweight and has an easy to read LCD display with LED backlight when needed. The internal pump has a flowrate of roughly 100 cc/min and features a built-in gas dryer tube that removes moisture. The Viasensor G100 is lightweight and has an easy to read LCD display with LED backlight when needed. Monitoring CO2 and atmospheric levels in incubators is crucial to the successful growth of cell cultures and embryos and having a simple to operate analyzer is vitally important.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |